编号 | 标题（中文） | 标题（英文） | 年份 | 备注 | 原文链接 |
1 | WELMEC介绍 | WELMEC - An Introduction | 2017 | 一般 | |
2 | 指令2014/31/EU和2014/32/EU：普遍适用 非自动衡器、自动衡器、多维测量器具 | Directives 2014/31/EU and 2014/32/EU: Common Application Non-automatic Weighing Instruments (NAWI), Automatic Weighing Instruments (AWI), Multi-dimensional Measuring Instruments (MDMI) | 2021 | 非自动衡器指令 | |
2.2 | 销售终端（POS）设备（非自动衡器）测试指南 | Guide for Testing Point of Sale (POS) Devices (Non-Automatic Weighing Instruments) | 2007 | 非自动衡器指令 | |
2.4 | 非自动衡器和自动衡器非关键结构的定义指南 | Guide Defining Non-critical Constructions for NAWI and AWI | 2021 | 非自动衡器指令 | |
2.6 | 自动分检衡器测试指南 | Guide for the Testing of Automatic Catchweighing Instruments | 2008 | 非自动衡器指令 | |
2.8 | 非自动衡器（指示器）测试结果转换指南（出于测试自动衡器的目的） | Guide for Conversion of NAWI (Indicators) Test Results for AWI Purposes | 2012 | 非自动衡器指令 | |
2.10 | 非自动衡器和自动衡器模块评价的技术实施 | Technical Implementation of the Modular Evaluation for Non-automatic Weighing and Automatic Weighing Instruments | 2021 | 非自动衡器指令 | |
4.2 | 在受管制测量中确定适当置信水平的要素 | Elements for Deciding the Appropriate Level of Confidence in Regulated Measurements | 2006 | 一般 | |
5.2 | 市场监管指南（非自动衡器和计量器具指令） | Market Surveillance Guide(NAWI and MID) | 2015 | 市场监管-非自动衡器指令-计量器具指令 | |
5.3 | 衡器和计量器具市场监管的风险评估指南 | Risk Assessment Guide for Market Surveiilance Weigh and Measuring Instruments | 2001 | 市场监管 | |
6.0 | 关于预包装产品方面的WELMEC文件的介绍 | Introduction to WELMEC Documents on Prepackages | 2010 | 预包装 | |
6.1 | 指令751/106/EEC和76/211/EEC关于e标志预包装产品的贴标和质量管控方面的适用范围-术语定义 | Application of Directives 75/106/EEC and 76/211/EEC Concerning the Marking and Quantity Control of E-Marked Prepackages - Definition of Terms | 2019 | 预包装 | |
6.3 | 指令76/211/EEC协调实施指南 | Guidance for the Harmonised Implementation of Council Directive 76 211 EEC | 2009 | 预包装 | |
6.4 | 关于e标志预包装产品的包装商和进口商指南 | Guide for Packers and Importers of e-marked Repacked Products | 2015 | 预包装 | |
6.5 | 关于e标志预包装产品管控的主管部门指南 | Guidance on Controls by Competent Departments on e marked Prepackages | 2012 | 预包装 | |
6.6 | 认可程序指南 | Guide for Recognition of Procedures | 2013 | 预包装 | |
6.7 | 关于预包装产品市场管控的主管部门指南 | Guidance for Market Control on Prepackages for Competent Departments | 2008 | 预包装 | |
6.8 | 沥干物（固形物）重量——沥干物（固形物）重量、沥干清洗物重量、去粘附物重量的检定指南 | Drained Weight-Guide on the Verification of Drained Weight, Drained Washed Weight and Deglazed Weight | 2020 | 预包装 | |
6.9 | 预包装产品——测量不确定度 | Prepackages - Uncertainty of Measurement | 2009 | 预包装 | |
6.10 | 预包装产品的管控信息 | Information on Controls on Prepacked Product | 2011 | 预包装 | |
6.11 | 包装后数量发生变化的预包装产品指南 | Guide for Prepackages Whose Quantity Changes After Packing | 2013 | 预包装 | |
6.12 | 指令75/107/EEC用作量器的瓶子的指南 | Guide on Directive 75 107 EEC Measuring Container Bottles | 2013 | 预包装 | |
6.13 | 进口e标志预包装产品合规指南 | Guide on Compliance of Imported e-marked Prepackages | 2017 | 预包装 | |
6.14 | 预包装产品重量和容积单位信息指南 | Guidance and Information on Units of Weight or Volume Used on Prepackags | 2018 | 预包装 | |
7.2 | 软件指南（计量器具指令2014/32/EU） | Software Guide (Measuring Instruments Directive 2014/32/EU) | 2020 | 软件 | |
7.3 | 基于WELMEC指南7.2的参考体系结构 | Reference Architectures Based on WELMEC Guide 7.2 | 2020 | 软件 | |
7.4 | WELMEC指南7.2的示范性应用 | Exemplary Applicaitons of WELMEC Guide 7.2 | 2020 | 软件 | |
7.5 | 非自动衡器的软件（非自动衡器指令2014/31/EU） | Software in NAWIs (Non-automatic Weighting Instruments Directive 2014 31 EU) | 2020 | 软件 | |
8.0 | 指令2014/31/EU和2014/32/EU公告机构——评定和操作概论 | Notified Bodies Directive 2014 31 EC and Directive 2014 32 EC - Generalitied on the Assessment and Operation | 2016 | 计量器具指令-非自动衡器指令 | |
8.1 | MID指令的术语定义及与其他国际计量相关文件术语的关联 | Termes and Definitions in MID and their Realtion to Terms Defined in Other International Metrologically Relevant Documents | 2020 | 计量器具指令 | |
8.2 | 计量器具指令2014/31/EU 模式H1的申请 | Measuring Instruments Directive 2014/32/EU Application of Module H1 | 2018 | 计量器具指令 | |
8.3 | 指令2014/31/EU或2014/32/EU模式B（EU型式检验）的申请 | Application of Module B EU-type Examination Under Directive 2014/32/EU (MID) or Directive 2014 31 EU (NAWID) | 2017 | 计量器具指令-非自动衡器指令 | |
8.4 | 指令2014/31/EU或2014/32/EU模式D（质量保证）的申请 | Application of Module D Quality Assurance Under Directive 2014/32/EU (MID) or DIrective 2014 31 EU (NAWID) | 2017 | 计量器具指令-非自动衡器指令 | |
8.5 | 基于EN ISO/IEC 17065的公告机构评定 | Assessment of Notified Bodies following the EN ISO/IEC 17065 | 2018 | 计量器具指令 | |
8.6 | 非自动衡器指令2014/31/EU 选用EN ISO 9001:2015的模式D制造商质量体系的符合性推定 | Non-Automatic Weighing Instruments Directive 2014/31/EU Presumption of Conformity of the Quality System of Manufacturers with Module D when EN ISO 9001:2015 is applied | 2018 | 计量器具指令-非自动衡器指令 | |
8.7 | 计量器具指令2014/32/EU——指定基于 EN ISO IEC 17020模式F的公告机构评定 | Measuring Instruments Directive 2014/32/EU- Assessment of Notified Bodies Designated for Moodule F based on EN ISO IEC 17020 | 2018 | 计量器具指令 | |
8.8 | 计量器具自愿性模块评价体系总体和管理方面的指南 | Guide on the General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring Instruments | 2017 | 计量器具指令-非自动衡器指令 | |
8.9 | 计量器具指令2014/32/EU的普遍适用——容量量器（CSM） | Measuring Instruments Directive 2014/32/EU, Common Application- Capacity Serving Measures (CSM) | 2020 | 计量器具指令-MI-008-容量量器 | |
8.10 | 计量器具指令2014/32/EU——依据计量器具指令附录F和F1生成用于统计检验的抽样计划的指南 | Measuring Instruments Directive (2014/32/EU)- Guide for Generating Sampling Plans for Statistical Verification Accroding to Annex F and F1 of MID 2014/32/EU | 2018 | 计量器具指令-公用事业仪表 | |
8.21 | 指令2014/31/EU和2014/32/EU的普遍适用 | Directives 2014 31 EU and 2014/32/EU Common Application | 2020 | 计量器具指令 | |
10.2 | 与下装测量系统相关的运输测定量测量装置（DTMQ）指南 | Guide to Metrological Devices for Transferring Measured Quantities (DTMQ) Associated to Bottom Loading Measuring Systems | 2019 | 计量器具指令-MI-005-非水液体 | |
10.5 | 燃油加油机标记指南 | Guide for the Marking of Fuel Dispensers | 2020 | 计量器具指令-MI-005-燃油加油机 | |
10.6 | 燃油加油机计量安全性指南（非水液体测量系统） | Guide for Secruing of Fuel Dispensers (Measuring Systems for Liquids Other Than Water) | 2019 | 计量器具指令-MI-005-燃油加油机 | |
10.8 | 计量器具指令附录VII (MI-005) 和 OIML R 117-1 (R81、R80、R139) 的普遍适用指南 | Guide for Common Application of MID Annex VII (MI-005) and OIML R 117-1, (R81, R80, R139) | 2020 | 计量器具指令-MI-005-非水液体 | |
10.10 | 纯数字部件的评估指南 | Guide on Evaluating Purely Digital Parts | 2019 | 计量器具指令-MI-005-非水液体 | |
10.11 | 兼容性表——制造商建立MI-005计量器具兼容性表的准则 | Compatibility Sheet - Guideline for Manufacturers to Establish Compatibility Sheets for MI-005 Measuring Instrumetns | 2019 | 计量器具指令-MI-005-非水液体 | |
10.12 | 测试仪表传感器——评定和测试MI-005仪表传感器的准则 | Testing Meter Sensors - Guideline for Assessing and Testing MI-005 Meter Sensors | 2019 | 计量器具指令-MI-005-非水液体 | |
10.13 | 减少欺诈性使用和误用公路油罐车测量系统的指南 | Guide for Minimizing Fraudulent Use and Unintentional Misuse for Measuring Systems on Road Tankers | 2019 | 计量器具指令-MI-005-公路油罐车 | |
10.14 | 燃油加油机预设装置的评价指南（MI-005）（2020） | Guide for Evaluating a Pre-setting Device for Fuel Dispenses ( MI-005) (2020) | 2020 | 计量器具指令-MI-005-燃油加油机 | |
11.1 | 计量器具指令2014/32/EU——公用事业仪表的普遍适用 | Measuring Instruments Directive 2014/32/EU - Common Application for Utility Meters | 2020 | 计量器具指令-MI-002-燃气表, 计量器具指令-MI-003-电能表 | |
11.2 | 计费用的基于时间消耗的测量指南（分时电能表） | Guideline on Time Depending Consumption Measurements for Billing Purpose (Intervel Metering) | 2010 | 计量器具指令-MI-003-电能表 | |
11.3 | 有功电能表、燃气表和转换装置的封印指南 | Guide for sealing of Active Electrical Energy Meters and Gas Meters and Conversion Devices | 2020 | 计量器具指令-MI-002-燃气表, 计量器具指令-MI-003-电能表 | |
11.4 | 型式评价证书信息指南（由燃气表的标记提供或随附） | Guide for Information in the Type Examination Certificate（to be borne by and to be accompanied (or provided) by the Markings on the Gas Meters ） | 2020 | 计量器具指令-MI-002-燃气表 | |
11.5 | 公用事业仪表和辅助装置 | Utility Meters and Ancillary Devices | 2015 | 计量器具指令-MI-002-燃气表, 计量器具指令-MI-003-电能表 | |
11.6 | 燃气表和体积转换装置的模块评价 | Modular Evaluation of Gas Meters and Volume (Conversion Devices) | 2018 | 计量器具指令-MI-002-燃气表 | |
11.7 | 有功电能表模块评价 | Modular Evaluation of Active Electrical Energy Meters | 2017 | 计量器具指令-MI-003-电能表 | |
11.8 | 电能表的外部辅助电源 | External Auxiliary Power Supply of Electriacal Energy Meters | 2018 | 计量器具指令-MI-003-电能表 | |
12.1 | 出租车计价器的普遍适用——指令2014/32/EU附件I和IX | Taximeters Common Application- Directive 2014/32/EU, Annexes I & IX | 2020 | 计量器具指令-MI-007-出租车计价器 | |
13.1 | 计量器具指令2014/32/EU公用事业仪表的普遍适用（水表和热量表） | Measuring Instruments Directive 2014/32/EU Common Application for Utility Meters (Water Meters and Thermal Energy Meters) | 2020 | 计量器具指令-公用事业仪表 | |
13.2 | 带附加功能和辅助装置的水表和热量表 | Water Meters or Thermal Energy Meters Equipped with Additional Funcationalities and Ancillary Devices | 2020 | ||
13.3 | 水表和热量表封印指南 | Guide for Sealing of Water and Thermal Energy Meters | 2020 |
本信息由广东省WTO/TBT通报咨询研究中心摘录/编辑/整理并翻译，译文仅供参考，转载请注明来源。
| 最新动态 | 专题研究 | 法律法规库 | 通报与召回 | 资料室 | 培训及评议 | 关于我们 |
|---|---|---|---|---|---|---|
| 国外资讯 国内资讯 工作动态 预警信息 消费警示 | 广东省检测认证服务内外贸一体化发展平台 国外计量 产品伤害监测 医疗防护用品 贸易摩擦 一带一路 食品接触产品 机电能效法规 绿色双碳 欧盟环保指令 REACH法规资讯 | 美国联邦法规 欧盟法律法规 其他法律法规 | TBT通报 SPS通报 召回与扣留 | 技术性贸易措施信息快讯 TBT通报和欧美召回季度简报 贸易技术壁垒参阅 出口指南 翻译资料 | TBT通报评议会专题培训基础知识普及视频培训案例分析一问一答 | 广东省WTO/TBT通报咨询研究中心 意见反馈 |
粤公网安备 44010602010620号