标准题录

DIN EN ISO 26782:2010-02

Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009 + Cor. 1:2009); German version EN ISO 26782:2009 + AC:2009

麻醉和呼吸设备-用于测量人定时用力呼气量的肺活量计（ISO 26782:2009 + Cor. 1:2009);德语版EN ISO 26782:2009 + AC:2009

DIN

2010-02

查看

DIN EN 61968-9:2014-10

Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control (IEC 61968-9:2013); English version EN 61968-9:2014

电业应用综合-配电管理系统接口-第9部分:仪表读数和控制界面（IEC 61968-9:2013）;英文版EN 61968-9:2014

DIN

2014-10

查看

DIN 8128-1:2011-05

Automatic catchweighing instruments - Part 1: Metrological and technical requirements - Tests (OIML R 51-1:2006 + Erratum 2010)

自动分检衡器-第1部分:计量和技术要求-试验(OIML R 51-1:2006 + Erratum 2010)

DIN

2011-05

查看

DIN EN IEC 61315:2020-07

Calibration of fibre-optic power meters (IEC 61315:2019); German version EN IEC 61315:2019

纤维光学功率计校准(IEC 61315:2019);德语版EN IEC 61315:2019

DIN

2020-07

查看

DIN EN 61746-1:2011-10

Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres (IEC 61746-1:2009); German version EN 61746-1:2011

光时域反射计(OTDRs)的校准-第1部分:单模光纤用光时域反射计(IEC 61746-1:2009);德语版EN 61746-1:2011

DIN

2011-10

查看

DIN EN 61746-2:2011-09

Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres (IEC 61746-2:2010); German version EN 61746-2:2011

光学时域反射计(OTDR)的校准-第2部分:多模光纤用光学时域反射计(IEC 61746-2:2010);德语版EN 61746-2:2011

DIN

2011-09

查看

DIN EN 62129-2:2012-03

Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011

波长/光频测量仪的校准-第2部分:迈克逊单波长干涉仪（IEC 62129-2:2011）;德语版EN 61746-2:2011

DIN

2012-03

查看

DIN EN 13757-1:2015-01

Communication systems for meters - Part 1: Data exchange; German version EN 13757-1:2014

仪表通信系统-第1部分:数据交换-德语版EN 13757-1:2014

DIN

2015-01

查看

DIN EN 13757-3:2018-06

Communication systems for meters - Part 3: Application protocols; German version EN 13757-3:2018

仪表通信系统-第3部分:应用协议-德语版EN 13757-3:2018

DIN

2018-06

查看

DIN EN 16836-1:2017-02

Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework; German version EN 16836-1:2016

仪表通信系统-仪表数据交换用无线网状网络-第1部分:介绍和标准化框架-德语版EN 16836-1:2016

DIN

2017-02

查看

DIN EN 810:1997-06

Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997

带电动压缩机的减湿器-考核试验,标记和操作要求及技术数据表-德语版EN 810:1997

DIN

1997-06

查看

DIN 8130:2014-11

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 1: Metrological and technical requirements - Tests (OIML R 107-1:2007)

不连续合计自动称重仪器（料斗称重）-第1部分:计量和技术要求-试验(OIML R 107-1:2007)

DIN

2014-11

查看

DIN EN 60359:2002-09

Electrical and electronic measurement equipment - Expression of the performance (IEC 60359:2001); German version EN 60359:2002

电气和电子测量设备-性能的表示(IEC 60359:2001);德语版EN 60359:2002

DIN

2002-09

查看

DIN EN 62056-6-1:2017-07

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2015); English version EN 62056-6-1:2016

电能计量数据交换-DLMS/COSEM套件第6-1部分:对象识别系统(OBIS) (IEC 62056-6-1:2015);英文版EN 62056-6-1:2016

DIN

2017-07

查看

DIN EN 62056-6-2:2017-06

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes (IEC 62056-6-2:2016); English version EN 62056-6-2:2016

电能计量数据交换-DLMS/COSEM套件-第6-2部分:COSEM接口类(IEC 62056-6-2:2016);英文版EN 62056-6-2:2016

DIN

2017-06

查看

DIN EN 62585:2013-03

Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter (IEC 62585:2012); German version EN 62585:2012

电声学-确定获得声级仪自由场响应的修正的方法(IEC 62585:2012);德语版EN 62585:2012

DIN

2013-03

查看

DIN EN 61672-1:2014-07

Electroacoustics - Sound level meters - Part 1: Specifications (IEC 61672-1:2013); German version EN 61672-1:2013

电声学-声级计-第1部分:规范(IEC 61672-1:2013);德语版EN 61672-1:2013

DIN

2014-07

查看

DIN EN 61672-2:2018-01

Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests (IEC 61672-2:2013 + AMD1:2017); German version EN 61672-2:2013 + A1:2017

电声学-声级计-第2部分:模式评估试验(IEC 61672-2:2013 + AMD1:2017);德语版EN 61672-2:2013 + A1:2017

DIN

2018-01

查看

DIN EN 61672-3:2017-05

Electroacoustics - Sound level meters - Part 3: Periodic tests (IEC 61672-3:2013); German version EN 61672-3:2013

电声学-声级计-第3部分:周期性试验(IEC 61672-3:2013);德语版EN 61672-3:2013

DIN

2017-05

查看

DIN EN 16796-3:2017-01

Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks; German version EN 16796-3:2016

工业卡车的能源效率-试验方法-第3部分:集装箱装卸电梯-德语版EN 16796-3:2016

DIN

2017-01

查看

DIN EN ISO 15002:2020-05

Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018); German version EN ISO 15002:2008 + A1:2019

连接到医用气体管道系统终端单元的流量计量装置(ISO 15002:2008 + Amd.1:2018);德语版EN ISO 15002:2008 + A1:2019

DIN

2020-05

查看

DIN 1319-1:1995-01

Fundamentals of metrology - Part 1: Basic terminology

计量学基础-第1部分:基本术语

DIN

1995-01

查看

DIN 1319-2:2005-10

Fundamentals of metrology - Part 2: Terminology related to measuring equipment

计量学基础-第2部分:与测量设备相关的术语

DIN

2005-10

查看

DIN 1319-3:1996-05

Fundamentals of metrology - Part 3: Evaluation of measurements of a single measurand, measurement uncertainty

计量学基础-第3部分:单一测量值测量和测量误差评价

DIN

1996-05

查看

DIN 1319-4:1999-02

Fundamentals of metrology - Part 4: Evaluation of measurements; uncertainty of measurement

计量学基础-第4部分:测量评估; 测量的不定度

DIN

1999-02

查看

DIN 51898-1:2014-05

Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM

气体分析-校准气体动态制备的绝对体积法-第1部分:用纯气体制备光盘

DIN

2014-05

查看

DIN EN ISO 6143:2006-11

Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006

气体分析-测定并检查标定用混合气体成分的比较方法法(ISO 6143:2001);德语版EN ISO 6143:2006

DIN

2006-11

查看

DIN EN ISO 14912:2006-11

Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003); German version EN ISO 14912:2006

气体分析-气体混合成份数据的转换(ISO 14912:2003);德语版EN ISO 14912:2006

DIN

2006-11

查看

DIN EN ISO 16664:2017-09

Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017); German version EN ISO 16664:2017

气体分析-校正气体和气体混合物的处理-指南(ISO 16664:2017)-德语版EN ISO 16664:2017

DIN

2017-09

查看

DIN EN ISO 15796:2008-11

Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005); German version EN ISO 15796:2008

气体分析-分析偏差的调查和处理(ISO 15796:2005);德语版EN ISO 15796:2008

DIN

2008-11

查看

DIN 51897:2018-04

Gas analysis - Terms and definitions

气体分析-术语和定义

DIN

2018-04

查看

DIN EN 16314:2013-09

Gas meters - Additional functionalities; German version EN 16314:2013

气量计-附加功能;德语版EN 16314:2013

DIN

2013-09

查看

DIN EN 12405-1:2018-12

Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2018

气量计-换算装置-第1部分:体积换算-德语版EN 12405-1:2018

DIN

2018-12

查看

DIN EN 12405-2:2012-10

Gas meters - Conversion devices - Part 2: Energy conversion; German version EN 12405-2:2012

气量计-换算装置-第2部分:能量转换-德语版EN 12405-2:2012

DIN

2012-10

查看

DIN EN 12405-3:2016-04

Gas meters - Conversion devices - Part 3: Flow computer; German version EN 12405-3:2015

气量计-换算装置-第3部分:流量计算仪-德语版EN 12405-3:2015

DIN

2016-04

查看

DIN EN 1359:2017-11

Gas meters - Diaphragm gas meters; German version EN 1359:2017

气量计-隔膜式燃气表;德语版EN 1359:2017

DIN

2017-11

查看

DIN EN 12480:2018-05

Gas meters - Rotary displacement gas meters; German version EN 12480:2018

气量计-旋转排气表;德语版EN 12480:2018

DIN

2018-05

查看

DIN EN 419:2020-04

Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency; German version EN 419:2019

非家用燃气照明架空发光辐射加热器-安全和能源效率; 德语版EN 419:2019

DIN

2020-04

查看

DIN EN 17175:2020-04

Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency; German version EN 17175:2019

非家用燃气架空辐射带加热器和多燃烧器连续辐射管加热器系统-安全和能源效率; 德语版EN 17175:2019

DIN

2020-04

查看

DIN EN 416:2020-04

Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency; German version EN 416:2019

非家用燃气架空辐射管加热器和辐射管加热器系统-安全和能源效率; 德语版EN 416:2019

DIN

2020-04

查看

DIN 32877-1:2020-04

Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms

几何产品规范(GPS)-尺寸测量设备:长度的光电测量-第1部分:基本原理和术语

DIN

2020-04

查看

DIN EN ISO 25178-70:2014-06

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014

几何产品规格(GPS)-表面结构:平面式-第70部分: 材料测量(ISO 25178-70:2014);德语版EN ISO 25178-70:2014

DIN

2014-06

查看

DIN 2280:2001-12

Geometrical Product Specifications (GPS) - "GO" and "NOT GO" screw plug gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

几何产品规范(GPS)-螺纹公称直径1mm至40mm的ISO通用公制螺纹的过端和不过端螺纹塞规

DIN

2001-12

查看

DIN 2282-2:2001-12

Geometrical Product Specifications (GPS) - "GO" screw gauging members - Part 2: "GO" workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter

几何产品规格(GPS)-“GO”螺钉测量部件-第2部分:“GO”车间的仪表、检查和设置测量部件

DIN

2001-12

查看

DIN 2285-1:2008-07

Geometrical product specifications (GPS) - "GO" screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose

几何产品规格(GPS)-ISO度制螺纹用“GO”螺环表-第1部分:1mm至200mm的公称直径

DIN

2008-07

查看

DIN 2284-2:2001-12

Geometrical Product Specifications (GPS) - "NOT GO" screw gauging members - Part 2: "NOT GO" workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter

几何产品规格(GPS)-“NOTGO”螺钉测量构件-第2部分:“NOTGO”车间仪表,用于ISO通用公制螺纹的检查和设置塞头计

DIN

2001-12

查看

DIN EN ISO 463:2006-06

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006

几何产品规格(GPS)-尺寸测量设备-机械千分表的设计和计量学特性(ISO 463:2006);德语版EN ISO 463:2006

DIN

2006-06

查看

DIN EN ISO 463 Berichtigung 1:2009-07

Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006, Corrigendum to DIN EN ISO 463:2006-06; German version EN ISO 463:2006/AC:2009

几何产品规格(GPS)-尺寸测量设备-机械千分表的设计和计量学特性(ISO 463:2006);德国版EN ISO 463:2006,对DIN EN ISO 463:2006-06的勘误;德语版EN ISO 463:2006/AC:2009

DIN

2009-07

查看

DIN EN ISO 9493:2011-03

Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010

产品几何技术规范(GPS)-尺寸测量设备:刻度盘测试指示器(杠杆式)-设计与计量特性(ISO 9493:2010);德语版EN ISO 9493:2010

DIN

2011-03

查看

DIN EN ISO 13102:2012-12

Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012); German version EN ISO 13102:2012

产品几何技术规范(GPS)-尺寸测量设备:三维测量设备:计量学特征和设计(ISO 13102:2012);德语版EN ISO 13102:2012

DIN

2012-12

查看

DIN EN ISO 3611:2011-03

Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010

产品几何技术规范(GPS)-尺寸测量设备:外观测量用千分尺-计量学特征和设计(ISO 3611:2010);德语版EN ISO 3611:2010

DIN

2011-03

查看

DIN EN ISO 13225:2012-08

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012

产品几何技术规范(GPS)-尺寸测量设备:高度计-设计和计量特性(ISO 13225:2012);德语版EN ISO 13225:2012

DIN

2012-08

查看

DIN 2239:2006-12

Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing

产品几何量技术规范(GPS)-尺寸计量量规-要求和检验

DIN

2006-12

查看

DIN 2250-1:2008-10

Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter

产品几何量技术规范(GPS)-过端环规和定位环规-第1部分:1mm～315mm标称直径

DIN

2008-10

查看

DIN EN ISO 25178-2:2012-09

Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012); German version EN ISO 25178-2:2012

产品几何技术规范(GPS)-表面结构:Areal-第2部分:术语、定义和表面纹理参数(ISO 25178-2:2012);德语版EN ISO 25178-2:2012

DIN

2012-09

查看

DIN EN ISO 12085:1998-05

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997

产品几何技术规范(GPS)-表面结构:轮廓法-图形参数(ISO 12085:1996);德语版EN ISO 12085:1997

DIN

1998-05

查看

DIN EN ISO 4287:2010-07

Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009); German version EN ISO 4287:1998 + AC:2008 + A1:2009

产品几何量技术规范(GPS)-表面结构:轮廓法-表面结构的术语、定义及参数(ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009);德国版本EN ISO 4287:1998 + AC:2008 + A1:2009

DIN

2010-07

查看

DIN EN ISO 5436-1:2000-11

Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000

产品几何量技术规范(GPS)-表面结构:轮廓法;测量标准-第1部分:材料测量(ISO 5436-1:2000);德语版EN ISO 5436-1:2000

DIN

2000-11

查看

DIN EN ISO 13385-1:2020-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019

产品几何量技术规范(GPS)-尺寸测量设备-第1部分:卡钳的设计和计量特性(ISO 13385-1:2019);德语版EN ISO 13385-1:2019

DIN

2020-03

查看

DIN EN ISO 1938-1:2016-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015

产品几何量技术规范(GPS)-尺寸测量设备-第1部分: 线性尺寸的普通极限量规(ISO 1938-1:2015);德语版EN ISO 1938-1:2015

DIN

2016-03

查看

DIN EN ISO 13385-2:2020-09

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020

产品几何量技术规范(GPS)-尺寸测量设备-第2部分:卡尺深度表的设计和计量特性（ISO13385-2:2020）;德语和英文版EN ISO 13385-2:2020

DIN

2020-09

查看

DIN EN ISO 1938-2:2017-05

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017

产品几何技术规范(GPS)-尺寸测量设备. 第2部分: 基准度盘式量规(ISO 1938-2:2017); 德语版EN ISO 1938-2:2017

DIN

2017-05

查看

DIN 863-1:2017-02

Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors

产品几何量技术规范(GPS)-微分米-第1部分:外部测量用微分米-最大允许误差

DIN

2017-02

查看

DIN EN ISO 25178-73:2019-10

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019

产品几何量技术规范(GPS)-表面纹理:Areal-第73部分:材料测量中表面缺陷的术语和定义（ISO25178-73:2019）;德语版EN ISO 25178-73:2019

DIN

2019-10

查看

DIN EN ISO 8041-1:2017-10

Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017); German version EN ISO 8041-1:2017

人对振动的反应-测量仪-第1部分:通用测振仪(ISO 8041-1:2017);德语版EN ISO 8041-1:2017

DIN

2017-10

查看

DIN 16195:1991-09

Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing

带圆形或V形底座的工业玻璃内液体温度计-要求和试验

DIN

1991-09

查看

DIN 5480-15:2006-03

Involute splines based on reference diameters - Part 15: Inspection

基于参考直径的渐开线花键-第15部分:检查

DIN

2006-03

查看

DIN EN 14268:2005-11

Irrigation techniques - Meters for irrigation water; German version EN 14268:2005

灌溉技术-灌溉用水表-德语版EN 14268:2005

DIN

2005-11

查看

DIN EN 60027-6:2008-04

Letter symbols to be used in electrical technology - Part 6: Control technology (IEC 60027-6:2006); German version EN 60027-6:2007

电气技术用字母符号-第6部分:控制技术(IEC 60027-6:2006);德语版EN 60027-6:2007

DIN

2008-04

查看

DIN EN ISO 3993:1995-11

Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995

液化石油气和轻质烃类-密度或相对密度的测定-压力液体比重测定法(ISO 3993:1984);德语版EN ISO 3993:1995

DIN

1995-11

查看

DIN EN IEC 61293:2021-03

Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:2019); German version EN IEC 61293:2020

与电源相关的额定值的电气设备的标记-安全要求(IEC 61293:2019);德语版EN IEC 61293:2020

DIN

2021-03

查看

DIN 1305:1988-01

Mass, as weighed value, force, weight force, weight, load; concepts

质量,如重量值、力、重量、重量、载荷;概念

DIN

1988-01

查看

DIN EN ISO 20456:2020-09

Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019

封闭管道中流体流量的测量-导电液体用电磁流量计的使用指南(ISO 20456:2017);德语版EN ISO 20456:2019

DIN

2020-09

查看

DIN EN 24185:1993-08

Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993

封闭管道中液体流量的测量;称重法(ISO 4185:1980);德语版EN 24185:1993

DIN

1993-08

查看

DIN 16002:2017-07

Mechanical pressure and temperature gauges - Absolute pressure gauges - Dimensions, Metrology, Requirements and Testing

机械压力表和温度表-绝对压力计-尺寸, 计量, 要求和试验

DIN

2017-07

查看

DIN 16003:2018-04

Mechanical pressure and temperature gauges - Differential pressure gauges - Dimensions, metrology, requirements and testing

机械压力表和温度表-差压表-尺寸, 计量, 要求和试验

DIN

2018-04

查看

DIN 16001:2017-04

Mechanical pressure and temperature gauges - High pressure gauges - Dimensions, Metrology, Requirements and Testing

机械压力表和温度表-高压压力计-尺寸, 计量, 要求和试验

DIN

2017-04

查看

DIN EN 60580:2001-12

Medical electrical equipment - Dose area product meters (IEC 60580:2000); German version EN 60580:2000

医用电气设备-剂量面积产品表(IEC 60580:2000);德语版EN 60580:2000

DIN

2001-12

查看

DIN EN 61674:2015-11

Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging (IEC 61674:2012); German version EN 61674:2013

医用电气设备-用于X射线诊断成像中带电离室和/或半导体探测器的剂量仪(IEC 61674:2012);德语版EN 61674:2013

DIN

2015-11

查看

DIN EN 60731:2014-10

Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (IEC 60731:2011); German version EN 60731:2012

医疗电气设备-带电离室的放射量测定器(IEC 60731:2011);德语版EN 60731:2012

DIN

2014-10

查看

DIN EN 62467-1:2016-09

Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers (IEC 62467-1:2009); German version EN 62467-1:2015

医用电气设备-近距离治疗用的剂量测量仪器-第1部分:基于良好型电离室的仪器(IEC 62467-1:2009);德语版EN 62467-1:2015

DIN

2016-09

查看

DIN EN 61676:2010-05

Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology (IEC 61676:2002+A1:2008); German version EN 61676:2002+A1:2009

医用电气设备-诊断放射学中X射线管电压的非侵入性测量用剂量测定仪器(IEC 61676:2002+A1:2008);德语版EN 61676:2002+A1:2009

DIN

2010-05

查看

DIN EN ISO 80601-2-56:2020-08

Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2017 + Amd1:2018); German version EN ISO 80601-2-56:2017 + A1:2020

医疗电气设备-第2-56部分:测量体温用临床温度计的基本安全和基本性能的详细要求(ISO 80601-2-56:2017 + Amd1:2018);德语版EN ISO 80601-2-56:2017 + A1:2020

DIN

2020-08

查看

DIN EN ISO 80601-2-61:2019-09

Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2017, Corrected version 2018-02); German version EN ISO 80601-2-61:2019

医用电气设备-第2-61部分:脉冲血氧计设备基本安全和基本性能的特殊要求(ISO 80601-2-61:2017,修正版2018-02);德语版EN ISO 80601-2-61:2019

DIN

2019-09

查看

DIN EN 45501:2016-03

Metrological aspects of non-automatic weighing instruments; German version EN 45501:2015

非自动称重仪器的计量 德语版EN45501:2015

DIN

2016-03

查看

DIN EN ISO 15112:2014-09

Natural gas - Energy determination (ISO 15112: 2011); German version EN ISO 15112:2014

天然气-能量测定（ISO15112:2011）;德语版EN 45501:2015

DIN

2014-09

查看

DIN EN ISO 2360:2017-12

Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017); German version EN ISO 2360:2017

非磁性导电基体上非导体覆盖层-镀层厚度的测量-振幅灵敏性涡流法(ISO 2360:2017);德语版EN ISO 2360:2017

DIN

2017-12

查看

DIN EN ISO 81060-1:2012-08

Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007); German version EN ISO 81060-1:2012

非侵入式血压计-第1部分:非自动测量型试验方法和要求(ISO 81060-1:2007);德语版EN ISO 81060-1:2012

DIN

2012-08

查看

DIN 5031-11:2011-04

Optical radiation physics and illuminating engineering - Part 11: Radiometer for measuring actinic radiant quantities - Terms, characteristics and their classification

光辐射物理学和照明工程-第11部分:测量放线辐射量的辐射计-术语、特性及其分类

DIN

2011-04

查看

DIN ISO 17123-4:2017-09

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM measurements to reflectors) (ISO 17123-4:2012)

光学和光学仪器-大地测量和地质勘测仪器的现场试验程序-第4部分:光电测距仪（对反射器的EDM测量）(ISO 17123-4:2012)

DIN

2017-09

查看

DIN EN ISO 8598-1:2015-01

Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO 8598-1:2014); German version EN ISO 8598-1:2014

光学和光学仪器-泡沫计-第1部分:通用仪器(ISO 8598-1:2014);德语版EN ISO 8598-1:2014

DIN

2015-01

查看

DIN ISO 16331-1:2020-09

Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters (ISO 16331-1:2017)

光学和光学仪器-测量和施工仪器试验的实验室程序第1部分:手持式激光距离表的性能(ISO 16331-1:2017)

DIN

2020-09

查看

DIN EN ISO 11554:2017-12

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017); German version EN ISO 11554:2017

光学和光子学-激光和激光相关设备-激光束功率、能量和时间特性的试验方法(ISO 11554:2017);德语版EN ISO 11554:2017

DIN

2017-12

查看

DIN EN ISO 15212-1 Berichtigung 1:2009-07

Oscillation-type density meters - Part 1: Laboratory instruments (ISO 15212-1:1998); German version EN ISO 15212-1:1999, Corrigendum to DIN EN ISO 15212-1:1999-06; German version EN ISO 15212-1:1999/AC:2009

振荡型密度计-第1部分:实验室仪器(ISO 15212-1:1998); 德语版EN ISO 15212-1:1999,DIN EN ISO 15212-1:1999-06的勘误;德国版EN ISO 15212-1:1999/AC:2009

DIN

2009-07

查看

DIN EN ISO 8222:2020-10

Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020); German version EN ISO 8222:2020

石油测量系统-校准-体积测量、试验罐和现场测量（包括液体和材料性能的计算公式）(ISO 8222:2020);德语版EN ISO 8222:2020

DIN

2020-10

查看

DIN 5032-10:2020-07

Photometry - Part 10: Luminance meters, concepts, characteristics and their designation

光度法-第10部分:亮度计、概念、特性及其名称

DIN

2020-07

查看

DIN 5032-11:2020-07

Photometry - Part 11: Near-field goniophotometers, terms, characteristics and their designation

光度法-第11部分:近场测光计、术语、特性及其名称

DIN

2020-07

查看

DIN EN ISO 18830:2018-02

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface - Method by measuring the oxygen demand in closed respirometer (ISO 18830:2016); German version EN ISO 18830:2017

塑料-海水/砂质沉积物界面中非浮塑料材料的需氧生物降解的测定-密闭呼吸计需氧量的方法(ISO 18830:2016);德语版EN ISO 18830:2017

DIN

2018-02

查看

DIN EN 16465:2015-12

Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering; German version EN 16465:2015

塑料-用于自然风化和人工风化的黑色标准温度计和白色标准温度计以及黑色板温度计和白色板温度计的校准方法EN 16465:2015

DIN

2015-12

查看

DIN ISO 11040-7:2020-11

Prefilled syringes - Part 7: Packaging systems for sterilized subassembled syringes ready for filling (ISO 11040-7:2015)

预填充注射器-第7部分:准备消毒的分装注射器的包装系统(ISO 11040-7:2015)

DIN

2020-11

查看

DIN EN 837-1:1997-02

Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996

测压仪-第1部分:波登测压仪.尺寸、测量技术、要求和试验-德语版EN 837-1:1996

DIN

1997-02

查看

DIN EN 837-3:2019-08

Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996

测压仪-第3部分:隔膜式和胶囊式压力表-尺寸、计量学、要求和试验-德语版EN 837-3:1996

DIN

2019-08

查看

DIN EN ISO 10524-1:2019-08

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018); German version EN ISO 10524-1:2019

医用气体用压力调节器-第1部分:带流量计量装置的压力调节器和压力调节器(ISO 10524-1:2018);德语版EN ISO 10524-1:2019

DIN

2019-08

查看

DIN EN ISO 15378:2018-04

Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017); German version EN ISO 15378:2017

医药用初级包装材料-ISO 9001:2015中应用的特殊要求,参照良好的制造规范(GMP) (ISO 15378:2017);德语版ENISO15378:2017

DIN

2018-04

查看

DIN 32567-1:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 1: Qualitative estimation of the material and procedure specific influences

微系统生产设备-材料对光学和触觉尺寸计量的影响的测定-第1部分:材料和程序特定影响的定性估计

DIN

2015-06

查看

DIN 32567-2:2014-10

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 2: Specimen for tactile procedures

微系统用生产设备-材料对光学和触觉尺寸计量学影响的测定-第2部分:触觉程序用试样

DIN

2014-10

查看

DIN 32567-3:2014-10

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices

微系统用生产设备-材料对光学和触觉尺寸计量学影响的测定-第3部分:触觉测量装置修正值的推导

DIN

2014-10

查看

DIN 32567-4:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 4: Specimen for optical procedures

微系统用生产设备-材料对光学和触觉尺寸计量学影响的测定-第4部分:光学程序用试样

DIN

2015-06

查看

DIN 32567-5:2015-06

Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 5: Derivation of correction values for optical measuring devices

微系统用生产设备-材料对光学和触觉尺寸计量学的影响的测定-第5部分:光学测量装置的校正值的推导

DIN

2015-06

查看

DIN EN ISO 14414:2019-09

Pump system energy assessment (ISO/ASME 14414:2019); German version EN ISO 14414:2019

泵系统能源评估(ISO/ASME 14414:2019);德语版EN ISO 14414:2019

DIN

2019-09

查看

DIN EN 16480:2017-07

Pumps - Minimum required efficiency of rotodynamic water pumps; German version EN 16480:2016

泵-旋转动力水泵的最低要求效率;德国版EN 16480:2016

DIN

2017-07

查看

DIN EN 16644:2015-04

Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise; German version EN 16644:2014

泵-旋转动力泵-额定功率不超过加热装置和200W的家用热水装置的200W的无循环器-用于测量结构和流体载噪声的噪声测试代码（振动声学）;德语版EN 16644:2014

DIN

2015-04

查看

DIN EN ISO 9906:2013-03

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012); German version EN ISO 9906:2012

回转动力泵-液压性能验收试验.等级1、2和3(ISO 9906:2012);德语版EN ISO 9906:2012

DIN

2013-03

查看

DIN EN ISO 80369-1:2019-08

Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2018); German version EN ISO 80369-1:2018

医疗保健用液体和气体用小口径连接器-第1部分:一般要求(ISO 80369-1:2018);德语版EN ISO 80369-1:2018

DIN

2019-08

查看

DIN 55540-1:1978-05

Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight

包装检验:标准容量预包装填充率的测定;预包装物品按重量标注

DIN

1978-05

查看

DIN EN 1434-6:2019-08

Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance; German version EN 1434-6:2015+A1:2019

热量表-第6部分:安装、调试、运行监测和维护-德语版EN 1434-6:2015+A1:2019

DIN

2019-08

查看

DIN EN 12645:2015-02

Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:2014

轮胎压力测量仪器-汽车轮胎压力和/或充气充气的检查装置-计量、要求和试验-德语版EN 12645:2014

DIN

2015-02

查看

DIN EN 14236:2018-12

Ultrasonic domestic gas meters; German version EN 14236:2018

超声波家用气体计量表;德语版EN 14236:2018

DIN

2018-12

查看

DIN 2282-1:2000-01

Verification of geometrical parameters - "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

几何参数的验证-螺纹过端量规-第1部分:标称直径1至40mm的ISO通用米制螺纹过端工作量规、检验量规和定位量规

DIN

2000-01

查看

DIN 2284-1:2000-01

Verification of geometrical parameters - "NOT GO" screw gauging members - Part 1: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter

几何参数的验证-螺纹不过端量规-第1部分:公称直径1至40mm的ISO通用米制螺纹不过端工作量规、检验量规和定位量规

DIN

2000-01

查看

DIN 879-3:1999-06

Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts

几何参数的验证-线性测量的表号指示器-第3部分:带机械指示器和电气极限触点

DIN

1999-06

查看

DIN 879-1:1999-06

Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication

几何参数的验证-线性测量的表号指示器-第1部分:带机械指示器

DIN

1999-06

查看

DIN 863-2:1999-04

Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing

几何参数的验证-微分米-第2部分:微分米卡钳头、深度微米-概念、要求、试验

DIN

1999-04

查看

DIN 863-3:1999-04

Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement; characteristics, requirements, testing

几何参数的验证-微米计-第3部分:外部测量专用设计微米卡钳-特性、要求、试验

DIN

1999-04

查看

DIN 51562-1:1999-01

Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 1: Viscometer specification and measurement procedure

粘度测定法-使用旋转粘度计测量粘度和流动曲线-第1部分:原理和测量几何学

DIN

1999-01

查看

DIN 51562-4:1999-01

Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscometer calibration and determination of the uncertainty of measurement

粘度测定法-用英尺粘度计测量运动粘度-第4部分:粘度计校准和测量不确定度的测定

DIN

1999-01

查看

DIN 53019-3:2008-09

Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections

粘度测定法-用旋转粘度计测量粘度和流量曲线-第3部分:测量和修正误差

DIN

2008-09

查看

DIN 53019-2:2001-02

Viscosimetry - Measurement of viscosities and flow curves by means of rotation viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement

粘度测定法-用旋转粘度计测量粘度和流量曲线-第2部分:粘度计校准和测量不确定性测定

DIN

2001-02

查看

DIN EN ISO 4064-1:2017-10

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014); German version EN ISO 4064-1:2017

可饮用冷水和热水表-第1部分:计量和技术要求(ISO 4064-1:2014);德语版EN ISO 4064-1:2017

DIN

2017-10

查看

DIN EN ISO 4064-2:2017-10

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017

可饮用冷水和热水表-第2部分:试验方法(ISO 4064-2:2014);德语版EN ISO 4064-2:2017

DIN

2017-10

查看

DIN EN ISO 4064-4:2014-11

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014); German version EN ISO 4064-4:2014

可饮用冷水和热水表-第4部分:ISO 4064-1未述及非计量要求;德语版EN ISO 4064-4:2014

DIN

2014-11

查看

DIN EN ISO 4064-5:2017-10

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014); German version EN ISO 4064-5:2017

可饮用冷水和热水表-安装要求(ISO 4064-5:2014);德语版EN ISO 4064-5:2017

DIN

2017-10

查看

DIN 8127:2007-11

Weights of classes E₁, E₂, F₁, F₂, M₁, M₁₋₂, M₂, M₂₋₃, and M₃ - Metrological and technical requirements (OIML R 111-1:2004)

权重类E₁,E₂,F₁,F₂,M₁,M₁₋₂,M₂,M₂₋₃,and M₃-计量与技术要求(OIML R 111-1:2004)

DIN

2007-11

查看

DIN EN 1434-1:2019-08

Thermal energy meters - Part 1: General requirements; German version EN 1434-1:2015+A1:2018

热量表-第1部分:一般要求-德语版EN 1434-1:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-2:2019-08

Thermal energy meters - Part 2: Constructional requirements; German version EN 1434-2:2015+A1:2018

热量表-第2部分:建筑要求-德语版EN 1434-2:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-3:2016-02

Heat meters - Part 3: Data exchange and interfaces; German version EN 1434-3:2015

热量表-第3部分:数据交换和接口-德语版EN 1434-3:2015

DIN

2016-02

查看

DIN EN 1434-4:2019-08

Thermal energy meters - Part 4: Pattern approval tests; German version EN 1434-4:2015+A1:2018

热量表-第4部分:型式批准试验-德语版EN 1434-4:2015+A1:2018

DIN

2019-08

查看

DIN EN 1434-5:2019-08

Thermal energy meters - Part 5: Initial verification tests; German version EN 1434-5:2015+A1:2019

热量表-第5部分:初始验证试验-德语版EN 1434-5:2015+A1:2019

DIN

2019-08

查看

DIN EN 1796:2013-05

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2013

有压或无压供水塑料管道系统-基于不饱和聚酯树脂(UP)的玻璃增强热固性塑料(GRP);德语版EN 1796:2013

DIN

2013-05

查看

DIN EN 12261:2020-09

Gas meters - Turbine gas meters; German version EN 12261:2018

燃气表-涡轮机燃气表;德语版EN 12261:2018

DIN

2020-09

查看

DIN EN 50470-3:2020-03

Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C); German version EN 50470-3:2006 + A1:2018

电学计量设备(a.c.)-特殊要求-第3部分:有功电能(等级指数A,B和C)静态计;德语版EN 50470-3:2006 + A1:2018

DIN

2020-03

查看

DIN EN 50470-2:2020-08

Electricity metering equipment (a.c.) - Part 2: Particular requirements - Electromechanical meters for active energy (class indexes A and B); German version EN 50470-2:2006 + A1:2018

电学计量设备(a.c.)-第2部分:特殊要求-有功电能(等级指数A,B)电极量表;德语版EN 50470-2:2006 + A1:2018

DIN

2020-08

查看

DIN EN 50470-1:2019-08

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C); German version EN 50470-1:2006 + A1:2018

电学计量设备(a.c.)-第1部分:一般要求,试验和试验条件-测量设备(等级指数A,B和C);德语版EN 50470-1:2006 + A1:2018

DIN

2019-08

查看

DIN EN 62052-11:2017-09

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003 + A1:2016); German version EN 62052-11:2003 + A1:2017

交流电测量设备(AC)-通用要求、试验和试验条件-第11部分:测量设备(IEC 62052-11:2003 + A1:2016);德语版EN 62052-11:2003 + A1:2017

DIN

2017-09

查看